Specifications
AIR setups
Dynaudio Professional AIR reference manual – 2014-08-28 9
The setups shown in this chapter will only oper-
ate correctly if all connections are made exactly as
seen in the illustrations!
Important: Master monitor setting
►
In each setup, one specic Master monitor must be
set as the System Controller.
►
To set a Master monitor as System Controller, the
TC LINK button on the rear panel of this monitor
must be set to the Out position.
►
The TC LINK button on all other Master monitors
must be set to the In position.
Reading the setup illustrations
►
The AIR Remote shown in most setups is an op-
tional hardware remote control. For more informa-
tion, see “AIR Remote” on page 64.
►
Audio signals are represented by solid lines:
►
TC link signals are represented by dashed lines: