User Manual

28 29
Maintenance
Cleaning the subwoofer
Dynaudio loudspeakers require no
special treatment apart from the kind
of careful handling you would normally
apply to any high tech product in your
home.
DANGER
Dangerous voltage inside!
Cleaning the 9S or other system
components when switched on can lead
to damages or electric shock.
Switch off the subwoofer and all
other components of your system
when cleaning any of these
components.
To clean the subwoofer:
The cabinet and other plain parts
should be cleaned with a soft dry or
slightly damp cloth.
Dust on the woofer diaphragms may
be removed with a ne furniture
brush.
Changing the fuse
WARNING
Risk of re due to wrong fuse type!
Inserting the wrong fuse type can lead
to overheating and inammation of the
subwoofer.
• For continued protection against risk
of re, replace only with same type
fuse and rating.
The fuse is placed on the rear of the
subwoofer below the mains power input.
It can be changed without removing the
amplier module.
To change the fuse:
1. Switch off the mains power switch
and unplug the power cable.
2. Pull out the fuse holder.
3. Replace fuse with same type and
rating.
4. Push fuse holder back rmly until it is
locked into position.
Warranty
Dynaudio Professional products are
warranted to be free from defects in
components and factory workmanship
under normal use and service for a
period of two (2) years when bought from
a reseller within the EU.
Dynaudio Professional products are
warranted to be free from defects in
components and factory workmanship
under normal use and service for a
period of one (1) year when bought from
a reseller outside the EU.
When failing to perform as specied
during the warranty period we will
undertake to repair, or at our option,
replace this product at no charge to
its owner, provided the unit is returned
undamaged and shipping prepaid, to
an authorized service facility or to the
factory.
Dynaudio shall not be responsible
for any incidental or consequential
damages. Dynaudio’s responsibility is
limited to the product itself. Dynaudio
assumes no responsibility for any loss
due to cancellation of any events, or
rent of replacement equipment or costs
due to third party’s or customer’s loss of
prot, or any other indirect cost or losses
however incurred. Dynaudio reserves the
right to make changes or improvements
in design or manufacturing without
assuming any obligation to change
or improve products previously
manufactured and / or sold.
The product warranty is only valid in
the country where the product was
purchased.
Exceptions
Dynaudio will always follow the law of
the respective markets should it differ
from the policy stated above or the
exceptions stated below.
This warranty shall be null and void, if
the product is subjected to repair work
or alteration by a person or facility other
than those authorized by Dynaudio;
mechanical damage including shipping
accidents; war, civil insurrection,
misuse, abuse, operation with incorrect
AC voltage, incorrect connections,
wrong accessories, incorrect use of
accessories, operation with faulty
associated equipment, exposure to
inclement weather conditions and normal
wear and tear.
Units, on which the serial number has
been removed or defaced, are not
eligible for warranty service.
Warranty
Note
Avoid touching the tweeter domes as any change of their shape may have an
impact on sound quality.
OFF
ON
AC IN