Owner's Manual

Owner’s Manual Focus XD
24
Display meanings
1. Copy the rmware le onto an empty
USB stick.
2. Switch the loudspeaker off using the
power switch on the rear of the device.
3. Insert the USB stick in the USB port on
the rear side of the housing.
4. Switch the loudspeaker on (power
switch on the rear of the device).
The rmware update is performed
automatically.
The while LEDs will light in
ascending order (see above).
The procedure is completed in just
a few seconds. The loudspeaker
enters standby mode automatically.
5. Switch the loudspeaker back off and
remove the USB stick.
6. Repeat steps 2–5 with the second
loudspeaker.
Firmware update
Note
The rmware update must be
performed separately for each
loudspeaker.
LED DISPLAY MEANINGS
Volume, mute
A number of white LEDs are illuminated.
The rst LED ashes.
The number of LEDs indicates the selected volume.
The loudspeaker is muted.
Firmware update
The white LEDs light in order. A rmware update is being performed.