Owner's Manual

18
Owner's Manual Focus XD
The sound of Focus XD loudspeakers can
be adjusted by increasing or lowering high
and low frequencies. Each loudspeaker
can be set separately and individually
based on the room conditions and
personal listening preferences.
Adjusting the low-frequency range
The Speaker Position rotary knob allows
you to lower low frequencies. This allows
you to balance out elevated or cancelled-
out low-frequency signal portions, as they
often occur in living spaces.
Ź
Set the Speaker Position rotary knob
to the desired position on the back side
of the housing for each loudspeaker.
There are 2 additional intermediate
stages between each of the main
positions that click into place (Neutral,
Wall, and Corner).
–– Neutral: free-standing loudspeaker (no
change to sound).
–– Wall: if placed near a wall.
–– Corner: if placed in a corner.
Adjusting the treble
Using the Treble switch on the rear side
of the housing allows you to adjust the
character of the sound to your listening
preferences.
Ź
Set the Treble switch on the rear side
of the housing to one of three settings:
•
+1 dB: Increase, creates a somewhat
brighter sound.
•
0 dB: Neutral position, no change.
•
–1 dB: Lowering, creates a somewhat
warmer sound.
Adjusting the
loudspeakers’
sound