Product specifications

Smart LT Manual Dynatronix, Inc.
198-0853-02 Rev F Page 27 of 126
6.2.1.3. Unit Configuration Menu
The unit configuration menu contains configuration parameters that will likely be changed
infrequently, probably only one time when a unit is installed. This menu can only be accessed at
power on and a password is required. An exit from this menu restarts the unit for normal
operation (similar to a power cycle).
Unit Configuration
Menu
Unit Configuration
Access Code
Totalizer
Host
Remote
System
Calibrate
Exit
Startup
Digital Input
(inhibit)
Buttons
Hardware Options
Unit Config Access
Code
Set Defaults
Exit
Output and Meters
Option Card
Host or Analog
control of current
Host or Analog
control of voltage
Baud Rate
Unit ID
View/Clear Count
Totalizer Units
Totalizer Decimal
Location
Exit
Start in standby or
last
Enable Power Fail
Alarm
Enable Operate on
hwdr enable
Pause/End cycle on
hwdr disable
Enable/Disable
OPER button
Enable/Disable
RMT button
Option Card
Exit
Exit
Exit