Product specifications

Diamond 36kW Manual Dynatronix, Inc.
198-1600-00 Rev F Page 85 of 146
A.6 Unit Setup Menu
    
.
.
    
   
   

To enter the unit setup menu from any run
screen press and hold the current and
voltage encoders for three seconds.
Continue holding the current and voltage
encoders.


Cycle Setup
Menu
Control Type (Manual, RTC, ATC)
Cycle Units
Cycle Decimal Location
Cycle Preset Time
Once “Unit” “SEt” is displayed release the
encoder switches to enter the unit setup
menu.
    
   

Output Setup
Menu
Output Type (DC, Pulse, Custom Waveform)
Waveform Profile
Pulse On Time
Pulse Off Time
    
    
    
    
.
.



Tolerance Setup
Menu
Error Handling
Setup Menu
Current Tolerance
Voltage Tolerance
Display Error Message Enable/Disable
Clear Error Codes
Return to the previously displayed
run screen.
    
  

Ramp Setup
Menu
Current Ramp Time
Voltage Ramp Time
    

Reading Setup
Menu
Reading Type