Product specifications

Page 8 of 146 198-1600-00 Rev F
8. This symbol indicates a protective earth connection.
9. This symbol means to consult the product manual for additional information.
10. This label indicates where high AC or DC voltages are located inside of the unit. Be aware
of these locations if power is needed for any work being done inside of unit. Not doing so
may endanger yourself and your equipment.
11. This label indicates where components or surfaces are operating at temperatures which
might cause injury either directly (burn) or indirectly (involuntarily moving body into another
danger). This label is used most often on the output transistor heatsinks.
12. If this power supply weighs more than 40lb / 18kg (see Section 4 - Specifications), it must
be lifted by two persons. Always use proper lifting technique. If power supply was shipped
with a fork lift base (the base must be provided by Dynatronix and must be physically
connected to the power supply housing) use a fork lift to move the power supply. Secure
the power supply to prevent the power supply from falling or tipping.
!