Product specifications

Diamond 36kW Manual Dynatronix, Inc.
198-1600-00 Rev F Page 29 of 146
6.2.1.3. Unit Configuration Menu
The unit configuration menu contains configuration parameters that will likely be changed
infrequently, probably only one time when a unit is installed. This menu can only be accessed at
power on and a password is required. An exit from this menu restarts the unit for normal
operation (similar to a power cycle).
Unit Configuration
Menu
Unit Configuration
Access Code
Totalizer
Host
Remote
System
Calibrate
Exit
Startup
Digital Input
Buttons
Hardware Options
Unit Config Access
Code
Set Defaults
Exit
Module A Read
Backs
Module B Read
Backs
Host or Analog
control of current
Host or Analog
control of voltage
Baud Rate
Unit ID
View/Clear Count
Totalizer Units
Totalizer Decimal
Location
Exit
Start in standby or
last
Enable Power Fail
Alarms
Operate Control
Input Config
Enable/Disable
OPER button
Enable/Disable
RMT button
Option Card
Watch Dog Timer
Time Out
Exit
Analog Option
Card
Exit
Exit