Product specifications

Diamond 36kW Manual Dynatronix, Inc.

198-1600-00 Rev F Page 23 of 146

6. Operating Procedures

6.1. Front Panel Controls

6.1.1. Meters

The meters display average current and average voltage. In addition to providing current and

voltage readings the meters can display menu names and other power supply settings. The

meters can show numeric parameter values or text messages.

6.1.1.1. Run Screens

Run screens are shown during normal supply operation. An example of a run screen is the

meters run screen which displays the output current and output voltage and allows for display and

edit of the current and voltage settings. Other examples of run screens include totalizer time, and

cycle time. The ‘SET’ lamp is off when a run screen is displayed.

6.1.1.2. Menus

Menus can be displayed to configure the power supply. The unit configuration menu contains

items that are generally only set when a power supply is initially installed. The setup menu

contains general cycle configuration such as RTC or ATC timed cycle control, output type (DC,

Pulse, or custom), ramp times, and current or voltage tolerances. The display select menu

OVERTEMP

FAULT

INHIBIT

RMT

LCL

OPER

STBY

VOLTS

AMPS

SET

Setting/Menu Indicator

Operate/Standby Switch & Indicator

Remote/Local Switch & Indicator

Current Meter

Voltage Meter

Voltage Encoder & Indicator

Current Encoder

& Indicator

Error / Status Indicators

Remote Control Panel