Product specifications

Page 140 of 146 198-1600-00 Rev F
40
Inverter
Control
(0 to n)
Line limit fold back fault on output
module A. Output power is limited
by reduced line voltage.
Fault remains active until
sufficient power is available to
run full output.
Output
power
ability is
reduced
based on
line
voltage,
can be
reduced to
zero.
YES
41
Inverter
Control
(0 to n)
Line limit fold back fault on output
module B. Output power is limited
by reduced line voltage.
Fault remains active until
sufficient power is available to
run full output.
Output
power
ability is
reduced
based on
line
voltage,
can be
reduced to
zero.
YES
42
Inverter
Control
(0 to n)
Inverter not ready for output.
Fault may momentarily appear
during initialization at power on,
this is a normal function. If fault
does not self clear report to
Dynatronix, Inc.
YES
NO
43
Inverter
Control
(0 to n)
Inverter not ready for output.
Fault may momentarily appear
during initialization at power on,
this is a normal function. If fault
does not self clear report to
Dynatronix, Inc.
YES
NO
44
Inverter
Control
(0 to n)
Critical inverter fault. Inverter
output on module A is not allowed
due to a fault condition. Other
fault codes will indicate the
specific problem.
Cycle power. If fault continues
report to Dynatronix, Inc.
YES
NO
45
Inverter
Control
(0 to n)
Critial inverter fault. Inverter
output on module B is not allowed
due to a fault condition. Other
fault codes will indicate the
specific problem.
Cycle power. If fault continues
report to Dynatronix, Inc.
YES
NO
46
Inverter
Control
(0 to n)
General inverter fault. Inverter
module A may not be functioning
properly. Other fault codes will
indicate the specific problem.
Cycle power. If fault continues
report to Dynatronix, Inc.
NO
NO
47
Inverter
Control
(0 to n)
General inverter fault. Inverter
module B may not be functioning
properly. Other fault codes will
indicate the specific problem.
Cycle power. If fault continues
report to Dynatronix, Inc.
NO
NO
48
Inverter
Control
(0 to n)
Invalid inverter communications
response to the process controller
request for configuration
The process controller continues
to request the configuration
information from the inverter
until it receives a valid response,
then the fault clears.
YES
YES
49
N/A
N/A
N/A
N/A
N/A
50
Inverter
Control
(0 to n)
Invalid inverter communications
response to the process controller
request for module A readings
The process controller continues
to request the readings from the
inverter until it receives a valid
response, then the fault clears.
YES
YES
51
Inverter
Control
(0 to n)
Invalid inverter communications
response to the process controller
request for module B readings
The process controller continues
to request the readings from the
inverter until it receives a valid
response, then the fault clears.
YES
YES