Product specifications

Diamond 10kW Manual Dynatronix, Inc.
198-1603-03 Rev 01 Page 19 of 150
5.5. Serial Host Port Connections
The serial host port can be used to monitor and/or control the power supply using the ASCII Host
Protocol (See section 7: Remote Host Control). The serial host port supports a half duplex
RS485 interface. Multiple power supplies can be connected to a single RS485 bus (multi-drop).
Each device on the RS485 bus is individually addressed using the ASCII Host Protocol. If an
RS232 device (such as a PC) will be connected to the host port then an RS232 to RS485
converter module will be required (not included).
1
5
9
6
RS485 Connections
1 nc
2 nc
3 nc
4 RS485 Data A
5 nc
6 nc
7 nc
8 RS485 Common
9 RS485 Data B
DB9 female connector on
remote control.