Product Manual

Dynatron 900
+™
17
DYNATRON 900+ WALL INSTALLATION
1. Align 2 special mounting screws in screw holes (D).
2. Align with device with the mounting bracket.
3. Attach the device with hand-screws (E).
DYNATRON 900+ PLATFORM INSTALLATION
1. Align hole A on the machine with pin F on the installation
plate.
2. Turn the machine to the desired orientation.
3. Tighten the 4 hand-screws ( E).
DYNATRON 900+ TABLE INSTALLATION
1. Tighten stud to two screw holes (G).
2. Attach universal mounting bracket to stud.
3. Tighten the knobs
Orientation Options