Product Manual
SMARTRAC FEATURES
SMARTRAC | OPERATOR’S MANUAL REV. 0 | 4/06/2018 2
SmarTRAC
Features
Unpacking
When you receive the unit, immediately unpack it and all accessories. Check for possible damage, obvious or concealed. In
case of damage, immediately notify the freight carrier and take any steps necessary to le a claim for the damage sustained.
Do not destroy or discard the shipping carton. If possible, the carton should be reused if the device must be shipped for any
reason, including calibration. e carton is specially designed to protect the unit from shipping damage. Improper packaging
of the unit during transport can result in damage and invalidate the warranty.
Complete the warranty registration form located at the back of this manual and return it to Dynatronics within 30 days of
purchase. is will insure that you are not billed for services that are covered by the warranty policy. Warranty registration
should include the serial number for the device.
Connect the AC power cord, which is provided as a hospital grade, UL listed plug, to a properly grounded 110/120V 60 Hz
AC outlet. e device will automatically switch to 220/240V 50 Hz when connected to a power source with that voltage. e
power cord must also be rmly plugged into the device itself. When the cord is properly connected, it cannot be easily pulled
out. Do not place the cord or the device in a place where the cord could be tripped over or accidentally pulled out of its socket
during a treatment.
Principles of Operation
e SmarTRAC traction device applies forces to the spine to alleviate pain caused by a variety of pressures on muscular
or skeletal structures. It exerts dened forces on the human body to alleviate pain. It utilizes computer technology for
programming of dierent kinds of traction. When a static force is applied, the patient’s muscles relax. By increasing the force
aer relaxation of the muscles, the treatment can be more eective.