Product Manual

GENERAL SPECIFICATIONS
DYNATRON® 25 SERIES™ | OPERATOR’S MANUAL 84
Software Updates
When Soware updates to the 25 Series devices become available, updates can be made quickly and easily by completing the
following steps:
1. Turn o the console.
2. Insert the SD card supplied by Dynatronics into the SD CARD slot on the le-side of the console (ngers of the SD
card facing up, label side down).
3. Turn on the console. ere will be a 3 to 4 second pause while the card syncs with the 25 Series system soware. A
RED screen will appear with the following warnings: “DO NOT DISCONNECT POWER,” “DO NOT TURN OFF”
4. Press START to begin the download. Follow the instructions on the screen.
5. Remove the SD card from the SD CARD slot by gently pressing on the card. Turn o the console.
25 Series Soware Update Screens
NOTE: All custom defaults will remain eective aer the new soware is downloaded.
CAUTION
e download process erases the device memory. If the download process is stopped for any reason prior to
completion, call Dynatronics for further instructions.