Product Manual
GENERAL SPECIFICATIONS
DYNATRON® 25 SERIES™ | OPERATOR’S MANUAL 81
Operation
is equipment is designed to operate in normal use under the following environmental conditions:
a. an ambient temperature range of +10°C
b. a relative humidity range of 30% to 75% including condensation
c. an atmospheric pressure range of 700 hPa to 1060 hPa
Safety Features of the Dynatron 25 Series
• Double redundancy protection on output ampliers.
• Current sensing. If current reaches the current limit for the device, intensity is automatically reduced.
• All intensity levels are automatically set to zero at the end of treatment (ensures proper setting of intensity levels for
the next patient).
• Internal surge protection protects against line noise, machine switching operation and any other type of interference
that could cause patient discomfort.
• e Power Cord is considered the ‘disconnect device’ when it is necessary to ensure that the device is disconnected
from a power source (for service or otherwise). Do not position the device such that it would be dicult to disconnect
the power cord from the device.
• Soundhead temperature monitoring prevents the soundhead from becoming too hot, both to protect the soundhead
crystal from damage and to ensure patient comfort.
Care and Cleaning Instructions
25 Series Console
• Clean the outer surface of the 25 Series devices with a slightly damp or lightly moistened cloth. Mild household
cleaners work well on the frame, but do not use cleaners on the display windows. Do not spray the solution directly
on the unit. . Solvents, caustic solutions and harsh or abrasive cleaners must never be used.
• Do not attempt to sterilize the device or its probes or pads, using any type of sterilization equipment including
autoclaves.
• Avoid stretching cords to full length, bending cords sharply or wrapping cords tightly. Undue stress on cords can
damage connections.
• Keep all food and drinks away from the machine and its accessories; spills can cause costly damage to the machine
and repairs for this type of damage are not covered by the warranty.
+30°C