Product Manual

INSTALLATION AND FEATURES
DYNATRON® 25 SERIES™ | OPERATOR’S MANUAL 4
Installation and Features
Unpacking
When you receive the unit, immediately unpack it and all accessories and check for possible damage, obvious or concealed.
In case of damage, immediately notify the freight carrier and take any steps necessary to le a claim for the damage sustained.
Do not destroy or discard the shipping carton. e carton should be reused if the device must be shipped for any reason
including calibration. e carton is specially designed to protect the unit from shipping damage. Improper packaging of the
unit during transport can result in damage and invalidate the warranty.
Complete the warranty registration form located at the back of this manual and return it to Dynatronics within 30 days
of purchase. is is essential to insure you are not billed for services that are covered by the warranty policy. Warranty
registration should include serial numbers for both the device and soundheads.
Connect the AC power cord, which is provided as a hospital grade, UL listed plug, to a properly grounded 110/120V 60 Hz
AC outlet (the device will automatically switch to 220/240V 50 Hz when connected to a power source with that voltage).
e power cord must also be rmly plugged into the device itself. When the cord is properly connected, it cannot be easily
pulled out. Do not place the cord or the device in a place where the cord could be tripped over or accidentally pulled out of
its socket during a treatment.
Read the operating instructions in this manual before proceeding with a treatment.
Standard Components
REF e following accessories are included with the 25 Series units:
Qty Part No. Description: One of the following devices:
1 D925T Dynatron 925 5-Channel Combination Stim and Ultrasound
1 D825T Dynatron 825 3-Channel Combination Stim and Ultrasound
1 D625T Dynatron 625 5-Channel Stim
1 D525T Dynatron 525 3-Channel Stim