Product Manual

TECHNICAL INFORMATION
DYNATRON
®
125 | OPERATOR’S MANUAL REV. 3 | 8/29/2017 30
Technical
Information
Setting Defaults
e Dynatron 125 Ultrasound has default settings that are automatically selected when the device is turned on. e default
settings feature allows previously used treatment parameters to be set up in just seconds. For guidance in selecting the
appropriate treatment settings consult published medical literature.
Save New Defaults
If your most common treatment settings are dierent than the ones already set for this device, you can change the defaults
to suit your own preferences. Setting new defaults is simple and defaults may be changed again and again whenever needed.
1. Set up a treatment using your preferred settings. Intensity, Frequency, and Duty Cycle cannot be saved as default
settings.
2. Touch the TIME window on the Operations Screen. e Time Screen will appear.
3. Press the image in the lower le-hand corner. Treatment Parameters are now saved as the Default Parameters for
future treatments.
CAUTION
ere are no serviceable parts in the Dynatron 125 devices.