Product Manual

ULTRASOUND INSTRUCTIONS
DYNATRON
®
125 | OPERATOR’S MANUAL REV. 3 | 8/29/2017 15
8. Press START.
Press the green START key, the treatment timer begins to count down and output is delivered to the soundhead.
If Intensity is not set before pressing START, an error message will appear: “NO HEAD INTENSITY. TREATMENT
WILL NOT START. PLEASE INCREASE INTENSITY.”
9. PAUSE. Temporarily PAUSE a treatment, if necessary, while the treatment is in progress.
To temporarily PAUSE an Ultrasound treatment, press the green START/PAUSE key. A tone will sound indicating
that the treatment has been paused. e Ultrasound output from the soundhead stops and the treatment timer is
paused without ending the treatment. Press the green START/PAUSE key again to restart the treatment. A tone will
sound indicating that the treatment is again in progress. Output resumes and the treatment timer starts from where
it was paused.
10. S T O P.
When the treatment time has elapsed, the ultrasound to the patient stops and a tone sounds signaling the end of a
treatment. Treatments in progress may be stopped at any time by pressing the red STOP key.
NOTE: During a COMBO treatment, THE STIM OUTPUT OF THE TREATMENT IS NOT PAUSED when the
PAUSE key is pressed, although the Ultrasound output is stopped and the treatment timer is paused.