Safety data sheet

SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006 (REACH) and Regulation (EU) No.
2015/830
X-23-7762
Material number X-23-7762
Revision date: 2/1/2017
Version: 5
Language: en-GB,IE
Date of print: 1/2/2018
Page: 4 of 9
SECTION 8: Exposure controls/personal protection
8.1 Control parameters
Occupational exposure limit values:
CAS No. Designation Type Limit value
7429-90-5 Aluminium powder
(pyrophoric)
Great Britain: WEL-TWA 10 mg/m³ (inhalable fraction)
Great Britain: WEL-TWA 4 mg/m³ (respirable fraction)
Ireland: 8 hours 1 mg/m³ (respirable fraction)
1314-13-2 Zinc oxide Great Britain: MEL/OES-STEL 10 mg/m³ Smoke
Great Britain: MEL/OES-TWA 5 mg/m³ Smoke
Ireland: 15 minutes 10 mg/m³ (respirable fraction)
Ireland: 8 hours 2 mg/m³ (respirable fraction)
Additional information:
Aluminium powder, zinc oxide are embedded in the product and therefore no dust is
present.
8.2 Exposure controls
Provide adequate ventilation.
Personal protection equipment
Occupational exposure controls
Respiratory protection:
If vapours form, use respiratory protection.
Use filter type A (= against vapours of organic substances) according to EN 14387.
Hand protection:
Protective gloves according to EN 374.
Glove material: Plastic or rubber.
Observe glove manufacturer's instructions concerning penetrability and breakthrough time.
Eye protection:
Tightly sealed goggles according to EN 166.
Body protection:
Wear suitable protective clothing.
General protection and hygiene measures:
Keep away from sources of ignition - No smoking.
Avoid contact with skin, eyes, and clothing. Do not breathe vapour/aerosol.
When using do not eat, drink or smoke.
Eye wash facility must be provided.
Wash hands before breaks and after work.
SECTION 9: Physical and chemical properties
9.1 Information on basic physical and chemical properties
Appearance:
Form: pasty
Colour: grey
Odour:
odourless
Odour threshold:
No data available
pH value:
No data available
printed by Shin-Etsu Silicones with Qualisys SUMDAT