Safety data sheet

SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006 (REACH) and Regulation (EU) No.
2015/830
X-23-7762
Material number X-23-7762
Revision date: 2/1/2017
Version: 5
Language: en-GB,IE
Date of print: 1/2/2018
Page: 2 of 9
SECTION 3: Composition / information on ingredients
3.1 Substances: not applicable
3.2 Mixtures
Chemical characterisation:
Organopolysiloxane mixture, anorganic materials
Hazardous ingredients:
Ingredient Designation Content Classification
EC No.
231-072-3
CAS 7429-90-5
Aluminium powder
(pyrophoric)
< 75 % Pyr. Sol. 1; H250. Water-react. 2; H261.
EC No.
215-222-5
CAS 1314-13-2
Zinc oxide approx. 20 % Aquatic Acute 1; H400.
Aquatic Chronic 1; H410.
Full text of H- and EUH-statements: see section 16.
Additional information:
Aluminium powder, zinc oxide are embedded in the product and therefore no dust is
present.
SECTION 4: First aid measures
4.1 Description of first aid measures
In case of inhalation:
Provide fresh air. Seek medical treatment in case of troubles.
Following skin contact:
Remove mechanically with cloth or paper.
Thoroughly wash skin with soap and water. In case of skin irritation, consult a physician.
After eye contact:
Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids
apart. In case of eye irritation consult an ophthalmologist.
After swallowing:
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult
physician immediately.
4.2 Most important symptoms and effects, both acute and delayed
No data available
4.3 Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
SECTION 5: Firefighting measures
5.1 Extinguishing media
Suitable extinguishing media:
Special extinguishing powder for metals. Cover spilled material with dry sand or cement.
Extinguishing media which must not be used for safety reasons:
Water, carbon dioxide, foam, extinguishing powder.
5.2 Special hazards arising from the substance or mixture
Emits toxic fumes under fire conditions.
In case of fire may be liberated: Metal oxide smoke, silicon dioxide, traces of
incompletely burned carbon compounds, formaldehyde, carbon monoxide and carbon
dioxide.
printed by Shin-Etsu Silicones with Qualisys SUMDAT