Manual

ID2K14-1SE www.dynaonline.com 2010-2012 Hyundai Genesis 2.0T Coupe - 4

FIG.D

FIG.E

FIG.F

6 Plug the Dyna 2000SE wiring harness in-line of the stock Crank

Position Sensor connectors (Fig. D).

7 Unplug the stock wiring harness from each Ignition Coil (Fig. E).

8 Plug the 2000SE wiring harness in-line of each Ignition Coil and

the stock wiring harness (Fig. F).

The pair of 2000SE coil leads with ORANGE colored wires need to go

in-line of the #1 cylinder (forward-most) coil.

The pair of 2000SE coil leads with YELLOW colored wires need to go

in-line of the #2 cylinder coil.

The pair of 2000SE coil leads with GREEN colored wires need to go

in-line of the #3 cylinder coil.

The pair of 2000SE coil leads with BLUE colored wires need to go

in-line of the #4 cylinder coil.

Stock

2000SE

Unplug

ID2K14-1SE.01