UST SVP-24 Stent and Vascular Prosthesis Tester and the New UST Universal Stent Tester Introducing: The World’s Most Versatile Stent Testing Platform for Stents and Grafts from 2 to 50mm ID.
The revolutionary solution for all your radial fatigue-testing needs SVP-24 and UST – Delivering next-generation productivity today Hot on the heels of the SVP-24, Dynatek Labs is proud to introduce the most powerful stent and graft durability testing platform in the world: the UST Universal Stent Tester. Until now, radial fatigue stent tester designs were severely constrained: you had to invest in three to five separate test units if you needed to test samples from 2 to 50mm ID.
Accelerate your stent and graft fatigue testing with exceptional cost savings! Innovative technology delivers superior testing results Dynatek’s SVP and UST feature a single motor that drives fluid with a pulsatile motion into the whole sample. This ensures that the entire sample is undergoing the same test condition and the pressurization is most like how the heart pressurizes the vasculature.
Maximum throughput or greatest versatility? How do I choose the right tester for my device testing needs? If you’re testing coronary, renal, SFA or carotid stents, and you are looking for maximum sample throughput, you may choose the SVP-24, which would cover samples with IDs up to 10mm. For iliac stents, you may choose the SVP-24 or UST-M or -L, depending on the ID of your stent. For AAA or TAA stent grafts, you may choose UST-VL for devices up to 50mm ID.
