Service manual

66 9650-0801-01 Rev. A
5 Remove screw in the middle of the plastic
isolator (located on top of the processor
board) in the area illustrated.
Note: During reassembly, torque screw to 6
in-lbs.
6 Remove the plastic isolator shield.
7 Remove the four (4) screws in the areas
illustrated.
Note: During reassembly, torque screws to
6 in-lbs.
8 Lift up the processor board and remove the
brown flex cable (there are two
connections).
9 Lift out the processor board.
10 Remove the black cable from the capacitor
in the area illustrated.
brown flex cable