Service manual

Removing the Handle
9650-0801-01 Rev. A ZOLL Propaq MD Service Manual 49
Removing the Handle
Tools Required
• #1 Phillips screwdriver with torque capability
• Orange (wooden) stick
Setup
• This procedure should be conducted on a static mat.
• Wear a wrist strap to ground during the procedure.
To reinstall the handle assembly, reverse the steps.
Handle Disassembly
1 Using an orange stick, lift the screw covers
off the handle in two locations.
2 Remove four (4) screws (2 on each handle)
and remove the handle.
Note: During reassembly, torque screws to
8 in-lbs.
screw
covers
screws