Service manual

9650-0801-01 Rev. A ZOLL Propaq MD Service Manual 47

Chapter 3

Disassembly Procedures

Overview

This chapter provides instructions on how to disassemble and reassemble the Propaq MD unit,

and includes the following sections:

• Required Equipment

• Safety Precautions

• Modules

• Handle Disassembly

• Printer Disassembly

• Main Unit Disassembly

• Front Enclosure Disassembly

• Display Disassembly

• NIBP and EtCO

Disassembly

• Monitor Board and SpO

Disassembly

• Defibrillator Board and Capacitor Bank Disassembly

Required Equipment

• No. 1 Phillips screwdriver with torque capability

• No. 2 Phillips screwdriver with torque capability

• Exacto-knife

• Orange wooden stick. (Available from H.A. Stiles: 1-800-447-8537)

• 90° dental pick

• Needle nose pliers

• 6 mm socket wrench

• 26 mm socket wrench