Service manual

CHAPTER 1MAINTENANCE TESTS
30 9650-0801-01 Rev. A
Printer Test
Tools Needed None
Test Setup None
Do this... Observe this... Pass/Fail
1.
On the Propaq MD, install the paper tray on
the left side of the unit.
2.
Press the
Print quick access key ( ) to start
the recorder.
Note: If the printer fails to start, check setup
for printer=yes.
3.
Press the Print quick access key
() to stop
the recorder after approximately 10 seconds.
The recorded waveforms on
the strip chart are clear and
dark.
oo