Service manual

CHAPTER 1MAINTENANCE TESTS

14 9650-0801-01 Rev. A

Operational Tests

The Propaq MD comes equipped with routine operational tests that can be performed

periodically. With the exception of the Physical Inspection of the Unit test, these tests contain

instructions within them provide guidance during the tests.

Physical Inspection of the Unit

Tools Needed None

Test Setup None

Observe this... Pass/Fail

Housing

Is the unit clean and undamaged?

2. Does the unit show signs of excessive wear?

3. Does the handle work properly?

4. Does the recorder drawer open and close properly?

5. Are input connectors clean and undamaged?

6. Are there any cracks in the housing?

7. Do the front panel or selector switches have any damage or cracks?

8. Are there any loose housing parts?

Paddles (if applicable)

Do the adult and pedi plates have major scratches or show signs of damage?

10. Do the adult shoes slide on and off easily to expose the covered pedi plates?

11. Are the paddles clean (e.g., fre23

e of gel) and undamaged? (if applicable)

12.

Cables

Are all cables free of cracks, cuts, exposed or broken wires?

13. Are all bend/strain reliefs undamaged and free of excessive cable wear?

14.

Battery

Is the Propaq battery fully charged?

15. Is the battery seated in the battery well correctly?

16. Is battery housing free of cracks and damage?

17. Are connectors free of damage and excessive wear?