Service manual

68 Repair Procedures Welch Allyn Propaq Encore Vital Signs Monitor

Replacing Air Tubing

Replace the NIBP tubing as a single assembly to ensure accurate tubing lengths. Refer to

“Field Replaceable Units (FRUs)” on page 117 for the tubing assembly part number.

D33

Note

If you don’t need to replace the length of tubing between the cuff hose connector

in the left side panel and the rest of the tubing assembly, don’t remove the left

side panel to disconnect this tube. Leave that length of tubing connected to the

side panel but disconnect it from the rest of tubing assembly as indicated by the

arrow in the figure below, and replace the tubing assembly.