Operating instructions
Swim Spa Operator’s Guide
SWIM SPA TERMINOLOGY
EQUIPMENT ACCESS PANEL:
This are located behind the side panel below the topside control
panel, this area houses the major components responsible for
the swim spas operation. The components include the pumps,
heater, control panel box, ozonator, and led light system (if
applicable). Pump and equipment placement may vary by
model.
L1
L2
N
G
XM
XE
OR
XM - PACK
XE - PACK
ACCESS PANELS
These are located on all four sides of the swim spa. All of the
panels are removable should service be required.
Swim spa LIGHT
Your swim spa light is designed for safety and is located in the
interior wall of your swim spa. The on/off switch is located on
the topside control panel.
Swim spa HEATER
This element is an electric heater housed in a stainless steel
tube. It is thermostatically controlled and equipped with
a high-limit temperature safety shut-off sensor. The high-
limit sensor cannot be reset until the temperature within the
heater assembly drops several degrees below the shut-off
temperature of 100˚ (varies by model). Should the high-limit
switch trip repeatedly, contact your dealer or qualied service
representative to diagnose the problem.
25