Operating instructions

Swim Spa Operator’s Guide
DRAINING YOUR SPA
Because your spa holds a relatively small amount of water, contaminant’s such as body oil,
perspiration, dirt, hair, etc., may become quite concentrated. For this reason, the water should be
drained and replaced every three months depending on use.
After draining is completed, turn the hose bib off by pushing in and turn clockwise one half turn.
Remove the hose. Wipe down the inside of your spa making sure your surface is dry and free from
standing water. We recommend that after draining or cleaning your spa that you put the cover back
on. Avoid exposing the acrylic surface to direct sunlight for an extended period of time. Extended
exposure can cause surface fading or cracking, which could void the acrylic warranty.
NOTE!
Note: Be sure that hose is on a downward grade to properly drain spa.
Turn off power at the breaker.
Hook up a garden hose to the hose bib located on the exterior drain of the cabinet to access
the hose bib, please pull the cap out and turn counter clock wise to remove the cap, attach
hose to the drain.
When water begins to drain out of the hose, be sure to drain the water to a convenient place.
•
•
•
37