User Manual

Forerunner 50 Owner’s Manual 13
train mode
PACE SHOW–display
pace in minutes per mile/
kilometer.
OR
SPEED SHOW–display
speed in miles/kilometers
per hour.
AUTO–turn Auto Lap
®
feature on or off. Laps
are triggered by distance.
If set to ON, press
view again to enter the
distance. When AUTO
lap is ON, you cannot use
the lap button to manually
mark laps.
ZONES–turn training
zones feature on or off.
See Training Zones.
PUSH CALIB–calibrate
foot pod by running a
known distance, see
page 8.
TxPAIR–see page 17.
•
•
•
•
•
CALIB–enter calibration
factor to adjust foot pod
calibration to a known
value. See page 8.
WHEEL–enter wheel
circumference in mm
(GSC10 required).
WGT LB–enter your
weight (pounds or
kilograms determined by
UNITS setting)
GENDER
PUSH PAIR–see page 25.
3. Use
+ and - to toggle or
change numeric settings.
4. Press
mode at any time to
return to the Train page.
Training Zones
1. On the Train page, press and
hold start/stop.
2. Press
view to advance to the
ZONES setting.
•
•
•
•
•
190-00839-00_0D.indd 13 7/31/2007 1:48:37 PM