User Manual

Preliminary document not for redistribution. Company confidential. Product features and specifications may vary.

Navigating Your SMW1 Sports Monitoring Watch

Each of the four watch buttons maintains a consistent function across the various modes and menus. The buttons

are described as Mode, Action, Adjust, and View.

ADJUST

MODE

Cycle Mode

Cycle Settings

ACTION

Start / Lap / Stop / Save

Adjust Setting UP

VIEW

Cycle View

Adjust Setting DOWN

Enter Adjust Mode

Backlight

Erase / Clear

Use the Mode button to cycle through the four primary modes: TIME, SPORT, TIMER, and DATA.

In any mode, press and hold the Mode button to ‘Time Jump’ immediately to TIME mode.

In the Adjust menu (see #3), use Mode to cycle through the adjustment settings.

In all modes, use the View button to cycle through displays. In TIMER mode, use View to toggle between Timer 1 and Timer 2.

In TIME mode, use View to select a time zone (press and hold) and to enable/disable the alarm (momentary press).

In the Adjust menu, use View to adjust the selected setting downwards.

Use the Action button to start, lap, stop, and save your SPORT session and to start and stop the timers (TIMER).

In TIME mode, use Action to cycle between Time/Alarm (momentary press) and to set the chime on or off (press and hold).

In DATA mode, use Action to cycle through session data menus (Totals/Averages/Lap Data).

In the Adjust menu, use Action to adjust the selected setting upwards.

In TIME, SPORT, and TIMER modes, press and hold the Adjust button to enter the Adjust menu.

Press Adjust to turn on the Backlight for 5 seconds; any button press during this time extends the backlight for an additional 5 seconds.

In DATA mode, Adjust is used to Erase saved sessions. In SPORT and TIMER modes, Adjust is used to reset/Clear data.