User's Manual

General Specifications
Ref In-Shoe Size: 34 mm (L) x 23 mm (W) x 8 mm (H)
Total In-Shoe Weight: <8 g (including battery)
Ref Size with Shoe Clip: 45 mm (L) x 29 mm (W) x 13 mm (H)
Total Weight with Clip: <9 g (including battery)
Foot Pod Attachment Method: Attached to shoe using patented one-piece clip.
User-interface: Always-on (no buttons or LED)
Power: user-replaceable CR2032 lithium battery
Battery life: >6 months (at 20oC) extreme cold can effect battery life
Battery low power indication 1 month prior
Communication link: ANT+™ protocol
RF frequency: 2.4 GHz (unable to transmit in water environment)
Communication Range: > 2.5 m (dependent on receiver)
Message Rate: 2 Hz
Regulatory compliance FCC, IC, CE, ROHS
Sensor Technology: Dynastream patented SpeedMax technology
Calibrated speed/dist accuracy: Walk 97%, Jog 98%, Run 97%: median accuracy
Uncalibrated speed/dist accuracy: Walk 95%, Jog 95%, Run 95%: median accuracy
Tested Speed Range: 3.6 km/hr to 19.8 km/hr (2.2 mph to 12.3 mph)
Tested Pace Range: 16:40 min/km to 3:00 min/km (26:50 min/mi to 4:50 min/mi)
Instantaneous cadence accuracy: +/- 1 stride/min
Sensor Accuracy Range: 0oC to +40oC
Water resistance: 1m
TECHNICAL SPECIFICATION MICOACH SDM
Note - Consumer Facing info:
be a bit more selective on what needs to go into technical specs in the user doc.