User's Manual

PAIRING STRIDE SENSOR and PACER
Every device in the pacer bundle is already paired. The Heart Rate Monitor in the Pacer Bundle is pre-paired with the pacer
device.
The SDM must be “paired” with an ANT+™ enabled receiver device such as miCoach Pacer.
Repairing Process
Pressing & holding the center and workout button at the same time while Pacer is off (TBD)
•Notes on pairing: The HRM must be active in order to pair it to the Pacer
– instruct users to put it on the chest to activate it. The SDM is always active.
Mark can confirm, but I presume both sensors must be paired at the same
time (if only one sensor is present and active, only it will be paired?).