Install Manual

Page 9 of 18 D00001685 - D52M SoC ANT Module Draft Data Sheet rev 0.4

dynastream.com thisisant.com

1.3 D52 ANT SoC Module Starter Kit and Components

The D52 starter kit (D52DK1) contains all the hardware necessary to get developing with ANT (including with the

D52MD2M8IA), and the downloadable ANT SoC Module Starter Kit User Manual has full details on using the kit with

reference examples and the nRF5 SDK from Nordic Semiconductor. The kit contents are described in Table 1, below:

D52 Starter Kit

Part No: D52DK1

Part No.

Description

Quantity

Picture

D52QD2M6IA-A

M4 module on carrier board with 20-pin

Molex connector, NFC connections

available, SWD programming header,

additional through-hole connections for

I/O pins

ANTBAT2

Battery board with a Molex socket, a

reset button and a five-position dip

switch

ANTIO1

I/O board with a Molex connector, a

Molex socket, 4 LEDs and 4 buttons

ANTUIF1

USB interface board with a Molex socket

ANTUSB-m

ANT USB dongle

Segger J-Link Lite Programmer

Table 1: D52 ANT SoC Module Starter Kit