Install Manual

Page 10 of 18 D00001685 - D52M SoC ANT Module Draft Data Sheet rev 0.4
dynastream.com thisisant.com
2 Product Overview
2.1 Block Diagrams
Figure 3: D52MD2M8IA Block Diagram
2.2 Pin-outs
A note on backwards drop-in compatibility: the D52M modules support drop-in compatibility with the following N5 M8
module models from Dynastream Innovations in certain configurations: N5150M8CD, N550M8CC, N548M8CB. For drop-in
compatibility, existing designs must use only the SWDIO capability of the reset/SWDIO pad on previous modules. If
needed, the reset function can be configured on another pad; see Table 2 below for more information.
A note on the preloaded Network Processor application: Please refer to