Install Manual

ManualsBrandsDynaStream Innovations ManualsElectronicsLow Power Transmitter 2402-2480 MHz

its affiliates

D52M ANT SoC Module

Module Hardware

 Integrated printed antenna

 On-board 32MHz and 32.768 kHz crystal clocks

 1.7V to 3.6V supply voltage range:

 Operating temperature: Industrial (-40°C to +85°C)

 Up to 24 GPIOs

 Programmable output/channel from -20dBm to 4dBm

 Excellent receiver sensitivity

-93dBm (ANT mode)

-96dBm (BLE mode)

 1dBm resolution RSSI

 Total 512kB flash, 64kB RAM

 SPI, I

C and UART interfaces

 ARM SWD interface

 Internal DC/DC converter supported

 14 x 9.8 x 2.0mm module

 Layout compatible options with N5150M8CD,

N550M8CC, N548M8CB

 Radio regulatory approval for major markets

 BLUETOOTH SIG qualification

 RoHS compliant

 Preloaded with an ANT Network Processor application

and SoftDevice.

ANT® Operation (using the latest s212 or s332

SoftDevice)

 79 selectable RF channels (2402 to 2480 MHz)

 Flexible network topologies: peer-to-peer, star, tree,

high node count, mesh and more

 Broadcast, acknowledged, and burst data

communication modes

 Built-in device search and pairing

 Built-in interference handling and radio coexistence

management with application radio disable requests

and application flash write/erase requests

 Enhanced ANT features:

o Supports up to 15 logical channels each with

configurable channel periods (5.2ms - 2s)

o Advanced burst data transfer modes (up to

60kbps)

o Optional channel encryption mode (aes-128)

o Supports up to 8 public, private and/or managed

networks

o Advanced power management features to

optimize application power consumption including

Event Filtering and Selective Data Updates

o Asynchronous transmit channel

o Fast channel initiation

Bluetooth®

low energy operation (when loaded with

the latest S132 or S332 SoftDevice)

 Bluetooth 4.2 compliant low energy single-mode

protocol stack suitable for Bluetooth low energy

products

o Concurrent Central, Observer, Peripheral, and

Broadcaster roles with up to:

 Multiple connections as a central

 One connection as a peripheral

 Observer

 Broadcaster

o Link layer

o L2CAP, ATT, and SM protocols

o GATT and GAP APIs

o GATT Client and Server

In certain configurations; See section 2.2 for complete

details

Module Pictures

Summary of content (18 pages)

PAGE 1
D52M ANT SoC Module Module Pictures Module Hardware  Integrated printed antenna  On-board 32MHz and 32.768 kHz crystal clocks  1.7V to 3.6V supply voltage range:  Operating temperature: Industrial (-40°C to +85°C)  Up to 24 GPIOs  Programmable output/channel from -20dBm to 4dBm  Excellent receiver sensitivity -93dBm (ANT mode) -96dBm (BLE mode)  1dBm resolution RSSI  Total 512kB flash, 64kB RAM  SPI, I2C and UART interfaces  ARM SWD interface  Internal DC/DC converter supported  14 x 9.8 x 2.
PAGE 2
Table of Contents D52M ANT SoC Module .........................................................................................................................................................1 Table of Figures .....................................................................................................................................................................4 List of Tables.........................................................................................................................
PAGE 3
Page 3 of 18 6 5.3 Radio Operation Specifications and Antenna Characteristics.......................................................................... 16 5.4 Electrical Specifications ............................................................................................................................... 16 Mechanical Drawings ................................................................................................................................................ 16 6.
PAGE 4
Page 4 of 18 D00001685 - D52M SoC ANT Module Draft Data Sheet rev 0.4 Table of Figures Figure 1: D52 Module Series Nomenclature ................................................................................................. 8 Figure 2: Production Tracking Code ............................................................................................................ 8 Figure 3: D52MD2M8IA Block Diagram .....................................................................................................
PAGE 5
Page 5 of 18 D00001685 - D52M SoC ANT Module Draft Data Sheet rev 0.4 Notices and Restricted use Information Information contained in this document is provided only for your ("Customer" or “you”) convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. Dynastream Innovations Inc.
PAGE 6
Page 6 of 18 D00001685 - D52M SoC ANT Module Draft Data Sheet rev 0.4 One Year Limited Warranty This D52 Module is warranted to be free from defects in materials or workmanship for 1 year from the date of purchase by the end customer. Within this period, Dynastream will, at its sole option, replace any D52 Modules that fail in normal use. Replaced D52 Modules have a 1 year warranty.
PAGE 7
Page 7 of 18 1 D00001685 - D52M SoC ANT Module Draft Data Sheet rev 0.4 D52 ANT SoC Module Series Overview Dynastream Innovations offers the D52 series of ANT SoC Modules, based on Nordic Semiconductor’s nRF52832 SoC supporting ANT, Bluetooth® low energy and extended features such as NFC. This expands Dynastream’s portfolio of multiprotocol ultra-low power wireless modules, popularized with the N5 series of modules. This draft document describes characteristics of the D52MD2M8IA, the 14.0 x 9.8 x 2.
PAGE 8
Page 8 of 18 1.1 D00001685 - D52M SoC ANT Module Draft Data Sheet rev 0.4 Nomenclature Figure 1: D52 Module Series Nomenclature 1.2 Production Tracking Code For technical support and customer service purposes, a production code of three characters of the format “YWR” is laser marked on the RF shield as illustrated below. In the code, YW denotes production date code and R denotes module version.
PAGE 9
Page 9 of 18 1.3 D00001685 - D52M SoC ANT Module Draft Data Sheet rev 0.4 D52 ANT SoC Module Starter Kit and Components The D52 starter kit (D52DK1) contains all the hardware necessary to get developing with ANT (including with the D52MD2M8IA), and the downloadable ANT SoC Module Starter Kit User Manual has full details on using the kit with reference examples and the nRF5 SDK from Nordic Semiconductor. The kit contents are described in Table 1, below: D52 Starter Kit Part No: D52DK1 Part No.
PAGE 10
Page 10 of 18 2 2.1 D00001685 - D52M SoC ANT Module Draft Data Sheet rev 0.4 Product Overview Block Diagrams Figure 3: D52MD2M8IA Block Diagram 2.2 Pin-outs A note on backwards drop-in compatibility: the D52M modules support drop-in compatibility with the following N5 M8 module models from Dynastream Innovations in certain configurations: N5150M8CD, N550M8CC, N548M8CB. For drop-in compatibility, existing designs must use only the SWDIO capability of the reset/SWDIO pad on previous modules.
PAGE 11
Page 11 of 18 D00001685 - D52M SoC ANT Module Draft Data Sheet rev 0.4 Appendix A – Using the ANT Network Processor Configuration for ANT Serial Line specification.
PAGE 12
Page 12 of 18 D00001685 - D52M SoC ANT Module Draft Data Sheet rev 0.4 D52M M8 Pin nRF52832 Pin Name Description P206 P027 P025 General Purpose I/O General Purpose I/O Table 2: D52 Module Series Pin-Out 2.3 Preloaded Software D52 modules are preloaded with the S212 ANT SoftDevice and the ANT Network Processor (NP) application as illustrated below. Depending on the module revision, the preloaded code may vary. Please refer to Appendix B – D52 Module PreLoaded Software Versions for further details.
PAGE 13
Page 13 of 18 2.4.2  2.4.3 D00001685 - D52M SoC ANT Module Draft Data Sheet rev 0.4 Initializing the SoftDevice Specification/information for D52M modules will be available in later data sheet revisions. Configuring the dc/dc converter D52 series modules can make use of the DC/DC Converter on nRF52832 chips. This can improve power consumption under certain conditions. 2.5 Design considerations RF performance is always affected by the environment.
PAGE 14
Page 14 of 18 3 D00001685 - D52M SoC ANT Module Draft Data Sheet rev 0.4 Regulatory Approvals and Compliance Note: This device has not been authorized as required by the Federal Communications Commission. This device is not, and may not be, offered for sale or lease, or sold or leased, until authorization is obtained.
PAGE 15
Page 15 of 18 3.5 Japan  3.6 Information for the D52M modules will be finalized in later drafts. Korea  3.7 Information for the D52M modules will be finalized in later drafts. BLUETOOTH Qualification  4 D00001685 - D52M SoC ANT Module Draft Data Sheet rev 0.4 Information for the D52M modules will be finalized in later drafts.
PAGE 16
Page 16 of 18 5.2 D00001685 - D52M SoC ANT Module Draft Data Sheet rev 0.4 Absolute Maximum Ratings Parameter Min Max Unit Supply Voltage (VCC) -0.3 3.9 V VI/O, VCC ≤ 3.6V -0.3 VCC+0.3 V VI/O, VCC > 3.6V -0.3 3.
PAGE 17
Page 17 of 18 7.2 D00001685 - D52M SoC ANT Module Draft Data Sheet rev 0.4 Technical References Documents 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
PAGE 18
Page 18 of 18 D00001685 - D52M SoC ANT Module Draft Data Sheet rev 0.4 Appendix A – Using the ANT Network Processor Configuration  Appendix to be added in later data sheet drafts. Appendix B – D52 Module Pre-Loaded Software Versions  Information to be included in future data sheet drafts. dynastream.com thisisant.