User's Manual

N5 ANT SoC Module Series Page 11 of 19
thisisant.com
To comply with Industry Canada regulations, it is required that product containing the N5 module series display a
label referring to the enclosed module. This exterior label can use wording similar to the following: “Contains IC:
3797A-2398”
This information shall be affixed in such a manner as not to be removable except by destruction or defacement.
The size of the lettering shall be legible without the aid of magnification but is not required to be larger than 8-
point font size. If the device is too small to meet this condition, the information can be included in the user manual
upon agreement with Industry Canada.
3.3 CE Declaration of Conformity
The N5 system module series is declared to be in conformance with the essential requirements and
other relevant provisions of Directive 1999/5/EC and 2011/65/EU, as a low-powered unlicensed transmitter:
 EN 60950-1:2006+A11:2009+A1:2010+A12:2011 Information technology equipment - Safety
- Part 1: General requirements
 EN 300 440-2 v1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short
range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2:
Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
 EN 61000-6-1:2007 Electromagnetic compatibility (EMC) -- Part 6-1: Generic standards -
Immunity for residential, commercial and light-industrial environments
 EN 301 489-3 V1.6.1 Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC); standard for radio equipment and services; Part 3:
Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz
and 40 GHz
3.4 Australia & New Zealand
The N5 system module series has been tested and found to comply with
 AS/NZS 4268:2012 Radio equipment and systems – Short range devices
 AS/NZS CISPR 22:2009 Information technology equipment - Radio disturbance characteristics
- Limits and methods of measurement
The ACMA/MED supplier code number is N20233
3.5 Japan
The N5 system module series has been granted type certificate (mark number R203-JN6049). Standard applied:
Notification No. 88 of MIC 2004, 2.4GHz band wide-band low-power data communication system (item 19 of
Article 2 paragraph 1)
3.6 BLUETOOTH Qualification
Contents to be added