Owner's manual

dynasonics.com
800-535-3569
©2012 Racine Federated Inc., all rights reserved
Step 1: Unlock System (Reboot)
Step 3: Copy Updated Files
Step 2: Update System (Reboot)
Step 4: Update Flowmeter
Step 5: Lock System (Reboot)
Unlock
Lock
Update
Flowmeter
Update
System
Copy
Copy Files Complete 98 Files
Check Update Status
Quit Update Utility
Restart System
ORDE
M
&
P
R
O
G
R
E
S
S
O
16. At the conclusion of the process the message “OK to reboot” will appear on the screen. At this point, remove the
thumb drive and then press OK.
dynasonics.com
800-535-3569
©2012 Racine Federated Inc., all rights reserved
Step 1: Unlock System (Reboot)
Step 3: Copy Updated Files
Step 2: Update System (Reboot)
Step 4: Update Flowmeter
Step 5: Lock System (Reboot)
Unlock
Lock
Update
Flowmeter
Update
System
Copy
15:19:23 Begin Embedded Update
15:19:23 Boot...AAAtrtrtrtr TrRBB Ready
15:19:28 Embedded File:
CRC32B:
18C97728
MD5:
867B861C
7038 D7D4 A2C5
Check Update Status
Quit Update Utility
Restart System
ORDE
M
&
P
R
O
G
R
E
S
S
O
The meter will reboot again and show the startup screen again. This reboot will use a more Windows-like process and requires
more time for completion. When the reboot is complete, the meter returns to the Start Screen.
dynasonics.com
800-535-3569
©2012 Racine Federated Inc., all rights reserved
Step 1: Unlock System (Reboot)
Step 3: Copy Updated Files
Step 2: Update System (Reboot)
Step 4: Update Flowmeter
Step 5: Lock System (Reboot)
Unlock
Lock
Update
Flowmeter
Update
System
Copy
15:19:23 Begin Embedded Update
15:19:23 Boot...AAAtrtrtrtr TrRBB Ready
15:19:28 Embedded File:
CRC32B:
18C97728
MD5:
867B861C
7038 D7D4 A2C5
F74EE8D207CE
15:19:30 Erase ............ Success
15:19:41 Program ............ Success
15:20:11 Verify ............ Success
!Success Embedded Update!
Exiting Reprogramming Mode
Check Update Status
Quit Update Utility
Restart System
ORDE
M
&
P
R
O
G
R
E
S
S
O
DXN Portable Ultrasonic Measurement System
Page 92 February 2013