Owner's manual

APPENDIX B: UPGRADING SOFTWARE
MPORTANTI
The Dynasonics USB Flash Drive is formatted in FAT/FAT32. NTFS (New Technology File System) formats will not work.
The upgrade is supplied as a self extracting zip file and must be expanded on a PC before it can be loaded into the DXN.
1. Save the supplied zip le to a convenient place on the computers hard drive.
2. Double-click on the DXN_Updater_R_x.zip le to start the extraction process. The completed extraction places the
folder PortableFlowmeter on the hard drive. This is the folder that needs to be copied to the USB thumb drive.
Name Date modied Type Size
PortableFlowmeter 11/29/2011 8:11 AM File Folder
OTE:N The “x” in the filename stands for the current revision letter.
3. When the extraction process is complete, copy the les to a USB thumb drive.
4. Start the DXN and allow it to get to the Display>Meters screen.
Site Name0.00 GPM
3/28/2012
13:24
Meter Adv Cal System
Display
Site Log I/O
AlertsTableGraph SetupGraph
Meters
Flow
0.00
GPM
Totalizer NET TT Quality
0.00
Gallons
0
%
OTE:N Revision E and later of the DXN firmware has multi-language capabilities. Tabbed information can be shown in a
variety of languages. To change the language displayed on the menu tabs, push the flags icon on the System > Misc
screen until the desired language appears. Alternately press the drop-down list button and all available languages
are shown in a drop-down combo box.
SystemSite I/O CalAdv
Display
Meter Log
Misc
Comm
Update
Storage
ENet
PC
Disk TimePower
English
ORDE
M
&
P
R
O
G
R
E
S
S
O
Flag Icon
Button
Drop-Down
List Button
5. Insert the thumb drive into the USB port on the rear of the DXN.
6. From the Display>Meters screen, press the System tab on the far right of the display.
7. Select System>Update.
8. Press the Quit Meter to Manage / Update button.
DXN Portable Ultrasonic Measurement System
Page 88 February 2013