Owner's manual

OTE:N A microinch (µ inch) is one millionth (1/1,000,000) of an inch.
If a pipe material was chosen from the Pipe Material list, a nominal value for relative roughness in that material will be
automatically loaded.
If the pipe has a roughness value that differs from standard for the pipe type, a custom value can be entered using the
Roughness controls.
Pipe Sound Speed (Value)
If Other is chosen from the Pipe Material list a Pipe Sound Speed control will become available at the bottom of the pipe page.
If the Entry Units are in English the Pipe Sound Speed is entered in FPS. For Metric units the pipe sound speed is in MPS.
Site Name0.00 GPM
03/28/2012
13:24
Meter Adv Cal Sys tem
Display
Site
Log I/O
Create Liner Transit Doppler
Fluid
Lookup
Pipe
Pipe Sound Speed (FPS) 8650
Roughness (microFt) 150
Pipe Wall (Inch) 0.154
Pipe OD (Inch) 2.375
Figure 66: Pipe Sound Speed Control
Liner Page
Site Name0.00 GPM
03/28/2012
13:24
Meter Adv Cal Sys tem
Display
Site
Log I/O
Create Lookup Transit Doppler
Fluid
Pipe
Liner
Roughness (microFt)
Liner Wall (Inch) 0.000
Liner Sound Speed
Liner Material None
0
0
Figure 67: Liner Page
Installation & Operation Manual
Page 51 February 2013