Owner's manual

Pipe Material
Choose the pipe material from the combo box drop-down.
Manual Dimension Entry Iron - Cast St Steel 304L
Aluminum Iron - Ductile St Steel 316
Brass (Naval) PVC CPVC St Steel 347
Carbon Steel St Steel 302/303 St Steel 410
Copper St Steel 304 St Steel 430
Table 9: Pipe Material Choices
OTE:N This list is provided as an example. Additional pipe materials are added periodically.
Pipe Schedule/Class
The choice of pipe material determines the choices available in the Schedule/Class drop-down menu. For example, if a pipe
material that is governed by ANSI standards is selected, the menu label will show Schedule and the schedule choices will be
appropriate for ANSI pipe. If Cast Iron is chosen the label Class will be shown instead of Schedule, indicating the pipe material
is categorized in classes.
Nominal Size
This selection allows various standard or nominal pipe sizes to be chosen. Simply choose one of the nominal values from the
drop-down menu.
Liner Schedule – Restricted Choice
Certain combinations of Pipe Material, Class, and Nominal Size have liner information built into the pipe specification. This
condition is usually found in ductile iron classes, 6 inches and up. If a ductile pipe with built-in liner is used, a selection of
either Standard or Double can be made.
OTE:N The choice of Standard or Double will disable the Site>Liner menu item.
Site Name0.00 GPM
1/16/2013
2:18 PM
Meter Adv Cal Sys tem
Display
Site
Log I/O
Create Liner Transit Doppler
Fluid
Pipe
Lookup
Pipe Material Manual Dimension Entry
Schedule
Nominal Size (in)
Liner Type
Use Manual Entry
Use Manual Entry
Use Manual Entry
Figure 57: Lookup Page Manual Entry
If Manual Dimension Entry is selected in Site>Lookup (see Figure 57) screen the parameters in the Site>Pipe screen will be
available for user input as in Figure 59.
OTE:N If the Site>Lookup feature is used, the values are automatically loaded into the parameter choices in the Site>Pipe
screen but Pipe OD and Pipe Wall [Thickness] are still available for changes.
DXN Portable Ultrasonic Measurement System
Page 44 February 2013