Manual

dynasonics.com
800-535-3569
©2012 Racine Federated Inc., all rights reserved
Step 1: Unlock System (Reboot)
Step 3: Copy Updated Files
Step 2: Update System (Reboot)
Step 4: Update Flowmeter
Step 5: Lock System (Reboot)
Unlock
Lock
Update
Flowmeter
Update
System
Copy
15:19:23 Begin Embedded Update
15:19:23 Boot...AAAtrtrtrtr TrRBB Ready
15:19:28 Embedded File:
CRC32B:
18C97728
MD5:
867B861C
7038 D7D4 A2C5
F74EE8D207CE
15:19:30 Erase ............ Success
15:19:41 Program ............ Success
15:20:11 Verify ............ Success
!Success Embedded Update!
Exiting Reprogramming Mode
Check Update Status
Quit Update Utility
Restart System
ORDE
M
&
P
R
O
G
R
E
S
S
O
19. Press the Lock button and then remove the USB Update Drive.
When the Lock button is pressed more code appears in the progress screen. When the process is complete a request
to reboot appears in the middle of the screen.
dynasonics.com
800-535-3569
©2012 Racine Federated Inc., all rights reserved
Step 1: Unlock System (Reboot)
Step 3: Copy Updated Files
Step 2: Update System (Reboot)
Step 4: Update Flowmeter
Step 5: Lock System (Reboot)
Unlock
Lock
Update
Flowmeter
Update
System
Copy
Check Update Status
Quit Update Utility
Restart System
ORDE
M
&
P
R
O
G
R
E
S
S
O
C:\Documents and Settings\FlowMeterUser>ewfm
*** Enabling overlay
Protected Volume Conguration
Type RAM
State DISABLED
Boot Command ENABLE
Param1 0
Param2 0
Presistent Data “”
Volume ID C7 A2 27 25 00 7E 00 00 00 00 00
Device Name “\Device\HarddiskVolume1” [C}
Max Levels 1
Clump Size 512
Current Level N/A
Memory used for data 0 bytes
Memory used for mapping 0 bytes
×
OK
Reboot
20. Press the OK button to reboot the system.
The DXN reboots ending up at the Start screen. This reboot uses a more Window’s like process and requires more
time for completion. When the reboot is complete the meter should return to the Start Screen.
Firmware Update Manual
Page 11 May 2013