User Manual

06-DPP-UM-00147 02/12 55
MENU MAPS
NUMERIC ENTRY
PIPE ID Pipe Inside Diameter
SEC MIN HOUR DAY
RATE INT Rate Interval
X PT 01(÷100) X PT 1 (÷10) X 1 (X1) X 10 (X10) X 100 (X1,00) X 1000 (X1,000) X 10000 (X10,000) X 100000 (X100,000) X 1000000 (X1,000,000)
TOTL MUL Totalizer Multiplier
Numeric Entry
FL C-OFF Low Flow Cuto
Numeric Entry
DAMPING Damping Percentage
Numeric Entry
SCALE F Scale Factor
GALLONS LITERS MGAL CUBIC FT M CU FT CUBIC ME MEGL TRS ACRE FT OIL BARR
(42 Gal)
LIQ BARR (31.5 Gal) LBS KGS VEL FEET VEL MTRS
RATE UNT Flow Rate Units
INCH (Inches) MM (Millimeters)
I D UNITS Pipe Measurement Units
RATE TOTAL BOTH DIAGNOSTICS
DISPLAY Display Choices
GALLONS LITERS MGAL CUBIC FT M CU FT CUBIC ME MEGL TRS ACRE FT OIL BARR
(42 Gal)
LIQ BARR (31.5 Gal) LBS KGS VEL FEET VEL MTRS
TOTAL UINT Totalizer Units
YES NO
CFG MOD 1 Congure Module 1
YES NO
CFG MOD 2 Congure Module 2
YES NO
AD SETUP Advanced Setup
Numeric Entry
PASSWORD Password Entry
NORMAL HIGH MANUAL
AGC MODE Automatic Gain Control
Numeric Entry
GAIN POT 4 mA Flow Value
NONE LOW MEDIUM HIGH
FILTER Hardware Filter
DT90 PROBE
XDCR TYP Transducer Type
Numeric Entry
C FACTOR Correction Factor
Numeric Entry
FREQUENCY n Frequency of Point (n)
Numeric Entry
COEFF n Coecient of Point (n)
YES NO
LINEAR Linearization?
Numeric Entry (0 to 10)
NUM PTS Number of Linearization Points
SETUP MENU
V1.11
START
May require up to 10 cycles
depending on the number
of linear points chosen.
To Module Conguration
From Module Conguration
Numeric Entry
SP GRAV Specic Gravity
Specic Gravity only appears
when LBS or KGS are selected
in either Rate Unit or Total Unit
FIGURE A1.1  MENU MAP  1