User Manual
40 06-DPP-UM-00147 02/12
ENGINEERING UNITS FOR RATE INTERVAL
RATE INT -- Time Interval for Flow Rate (Choice)
MIN Minutes
HOUR Hours
DAY Days
SEC Seconds
Select a desired engineering unit for ow rate measurements.
ENGINEERING UNITS FOR TOTALIZER
TOTL UNT -- Engineering Units for Flow Totalizer (Choice)
Velocity in Linear Feet VEL FEET Cubic Meters (CUBIC ME)
Velocity in Linear Meters VEL MTRS Millions of Metric Liters (MEGLTRS)
Gallons (GALLONS) Acre Feet (ACRE FT)
Liters (LITERS) Oil Barrels (42 Gallons) (OIL BARR)
Millions of Gallons (MGAL) Liquor Barrels (31.5 Gallons (LIQ BARR)
Cubic Feet (CUBIC FT) Pounds (LBS)
Millions of Cubic Feet (M CU FT) Kilograms (KGS)
Select a desired engineering unit for ow accumulator (totalizer) measurements.
TOTAL MULTIPLIER
TOTL MUL -- Flow Totalizer Multiplier (Value)
0.01 to 1,000,000
Utilized for setting the ow totalizer exponent. This feature is useful for accommodating a very large
accumulated ow. The exponent is a ×10
n
multiplier, where “n” can be from -2 (×0.01) to +6 (×1,000,000).
Table 4.1 should be referenced for valid entries and their inuence on the DFX display.
EXPONENT DISPLAY MULTIPLIER
× PT 01 2 × 0.01
× PT 1 1 × 0.1
×1 0 × 1
×10 1 × 10
×100 2 × 100
×1000 3 × 1,000
×10000 4 × 10,000
×100000 5 × 100,000
×1000000 6 × 1,000,000
TABLE 4.1 EXPONENT VALUES