R-58 - User Manual

Setting squelch
To select the squelch level:
1. press the MENU and ENT button;
2. turn the Encoder knob until ‘SQL? 004’(menu 004) is displayed
3. push ENTER;
4. turn the Encoder knob and select the desired squelch level (9 different
levels are available);
5. press ENTER
6. press the VFO/MR to exit
Scrambler Setting
1. press the MENU and ENT button;
2. turn the Encoder knob until ‘SCRM ? 005’(menu 005) is displayed
3. push ENTER;
4. turn the Encoder knob to select ON or OFF.
5. press ENTER
6. press the VFO/MR to exit
Backlight color selection
To select the LCD backlight color, follow this procedure:
1. press the MENU and ENT button;
2. turn the Encoder knob until ‘LED? 006’(menu 006) is displayed
3. push ENTER;
4. turn the Encoder knob to select AUTO, ON, OFF ;
5. press ENTER
6. press the VFO/MR to exit
Beep on/off
The keypad beep is activated by default. To deactivate it::
1. press the MENU and ENT button;
2. turn the Encoder knob until ‘BEEP? 007’(menu 007) is displayed
3. push ENTER;
4. turn the Encoder knob and activate/deactivate the beep (ON=beep enabled;
OFF=beep disabled);
5. press ENTER
6. press the VFO/MR to exit
Keypad lock setting
To lock the keypad to prevent the wrong operation:
1. press the MENU and ENT button;
2. turn the Encoder knob until ‘KEYBO? 008’(menu 08) is displayed