User manual

ManualsBrandsDynascan ManualsTVs & monitorsDS55LX3

User Manual

Version 1.01

The use of diagrams and illustrations in the manual for reference only, actual product may be different.

Product design and specifications are subject to change without notice

Professional LCDs

Summary of content (33 pages)

PAGE 1
Professional LCDs User Manual Version 1.01 The use of diagrams and illustrations in the manual for reference only, actual product may be different.
PAGE 2
Contents Safety Precautions........................................................................................................................................................3 Important Safety Information ........................................................................................................................................4 Declaration of Conformity ..........................................................................................................................................
PAGE 3
Digital RGB Input (DVI-D): DVI...............................................................................................................................25 RS-232 Output ........................................................................................................................................................26 RS-232 Input...........................................................................................................................................................
PAGE 4
Safety Precautions CAUTION Do not install display in a wet environment or place anything on the top of the display filled with liquid, such as vase or beverage. Do not install near flammable objects, such as gasoline or other volatile liquids. Do not install near any heat sources such as radiators or other heating devices. Do not install in a dusty environment. Do not damage the power cord or plug. Do not disassemble the screen to avoid electric shock.
PAGE 5
Important Safety Information Disassembling the LCD is strictly prohibited. hazards. Opening the cover may expose the user to shock or other Please contact DynaScan certified service professionals for all maintenance requirements. Do not allow any liquid to enter the LCD. Also avoid placing the LCD close to a water sources. Do not place heavy objects on the power cord. A damaged power cord might cause electric shock or fire. Do not bend, curl, or damage the power cord.
PAGE 6
Cleaning the Panel Use a soft, lint-free cloth to gently wipe dust off the screen panel. Do not use any hard material to wipe the panel. Do not poke the panel with your hand or any sharp object (such as a pen or a nail) or exert excessive pressure to the panel to prevent damage to the panel. Do not use any cleaning solution on the panel as it might cause discoloration. Cleaning the Casing Unplug the power cord. Gently wipe the casing with a soft cloth.
PAGE 7
Declaration of Conformity FCC Verification This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Information This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
PAGE 8
Getting Started Contents Confirm the accessories below are included with the display. If any item is missing, please contact your dealer. The color and shape of the accessories may vary by product. • Power cable • DS55LX3 Professional LCD • Remote Control • Quick Start Guide • RS-232 cable x1 pcs • Batteries (1.
PAGE 9
Installing and Replacing Remote Control Batteries 1. Open the battery compartment cover. 2. Insert 2 new AAA batteries. 3. Close the battery compartment cover. Warning: • Incorrect usage of batteries may cause leakage or explosion. • Pay attention to the polarity when installing batteries. • Do not use batteries from different brands together. Do not mix new and used batteries. Doing so may shorten the battery life or cause leakage.
PAGE 10
Installation The LCD must be properly installed using a wall mount. equipment. Incorrect installation may cause injury or damage the Product warranty does not cover damages caused by improper installation and DynaScan shall not be held responsible in such incident. Mounting Hanging the Professional LCD from the ceiling or mounting it on the wall is the responsibility of the user. ceilings or walls provide enough strength to support the LCD.
PAGE 11
Unit: DS55LX3 mm [inch] A B DS55LX3 User Manual 10
PAGE 12
Orientation When used in the portrait orientation, the LCD should be rotated clockwise such that the left edge becomes the top edge. Installation Location The ceiling or the wall must have enough strength to support the LCD and its accessories. Do not install in a location with strong vibrations or is dusty. Do not install near the building’s main electric panel. Do not install at a location where the LCD can be easily removed by the general public.
PAGE 13
When hanging from a ceiling Ensure that the ceiling is strong enough to support the LCD and it accessories. Also consider the effects of earthquakes, unexpected vibrations, and other external forces when evaluating the ceiling strength. The LCD should be secured to the building’s structural frame, such as a beam, and not to materials such as light steel frame or interior decoration. Do not use wood screws or dry wall anchors for installation.
PAGE 14
Connecting To a Power Source Using the power cable provided, insert the female connector into the back of the display as shown in the diagram below. Connect the male end of the power cable to a 100-240 volt, 50 / 60Hz AC power outlet. completely into the socket. Insert the plug A loose power connection may cause degradation to the image quality. Connecting an External Video Source Turn OFF the power to both the LCD and the external video device.
PAGE 15
Connecting Multiple Displays for Video Wall Applications st To daisy chain multiple displays for a video wall application, connect a video source to the 1 display into the chain with the supplied DVI cable and RS-232 cable. display. st nd Connect the DVI-OUT of the 1 display to the DVI-IN of the 2 st Using the Ethernet crossover cable provided, connect the RS-485 OUT of the 1 display to the RS-485 IN nd of the 2 display. Repeat connection for remaining displays.
PAGE 16
Connector Positions AC (OUT) Unit: AC (IN) RS-485 (IN) RS-232 (IN) DVI (IN) DVI (OUT) RS-485 (OUT) mm [inch] DS55LX3 DS55LX3 User Manual 15
PAGE 17
Input / Output Terminals 1 ○ 2 ○ 9 ○ 10 ○ 3 ○ 4 ○ 5 ○ 6 ○ 7 ○ 8 ○ 11 ○ 1 ○ RS-485 (IN): RS485 control function for the daisy chain application. 2 ○ RS-232 (IN): RS232C network input connection for the use of remote control from computer.
PAGE 18
Operating Instructions Powering On/Off the Display To turn on/off the display, press the power switch on the back of the display as shown in the diagram below. ON OFF NOTE: the remote control only works when the main switch is in the ON position. Using the Remote Control When using the remote control, aim the remote at the IR receiver on the display. model is at the back of the display with a receiving angle of 100 degrees.
PAGE 19
DS55LX3 Front Back 100°° DS55LX3 User Manual 18
PAGE 20
Using the Remote Control (cont.) Color and shape may vary by model.
PAGE 21
Using the Rear Panel Controls ITEM DESCRIPTION MENU OSD On / Off UP Move the cursor up or change the setting of the selected item DOWN Move the cursor down or change the setting of the selected item LEFT Exit the current selection RIGHT Select the highlighted item DS55LX3 User Manual 20
PAGE 22
Navigating the On Screen Display (OSD) Menu Press the MENU button on either the real panel control or remote control to display the OSD. Use the navigation arrows to select and adjust menu items. ITEM DISPLAY MODE DEFAULT LAN. DESCRIPTION Change the orientation of the Menu. The Menu can be displayed in either LANDSCAPE or PORTRAIT mode. Turn On / Off auto brightness adjustment. Note: With AUTO BRIGHTNESS on, the display brightness adjusts according to the ambient light.
PAGE 23
COLUMN POSITION 1 LOCAL DIMMING MODE 1 GAMMA NATIVE Horizontal position in video wall. Adjusts the contrast. MODE 1 is the highest contras. OFF is the lowest contrast. Adjusts the Gamma value. Enables / disables the ability to use the remote to control the Menu. IR CONTROL ON Note: When disabled, the remote control function can be enabled again from the control panel on the Signage or through the DynaScan “Display Manager” application. When in Power Save Mode, RS-232 controls do not function.
PAGE 24
Specifications MODEL PANEL POWER MECHANICAL SPECS USER INTERFACE ENVIRONMENT I/O Ports DS55LX3 LCD Panel Size 54.64 inches Native Resolution 1920 x 1080 Brightness 1500 cd/m² (Typ.) Contrast Ratio 3,000:1 (Static) 1,000,000:1 (Dynamic) Response Time 10 ms (Typ.) Viewing Angle 178° / 178° Life Time 50,000 hrs (Typ.) Panel Surface AG Haze 10%, 3H Power Supply Internal Rated Voltage 100 ~ 240V, 50 / 60Hz Power On Mode Max.
PAGE 25
Input Mode Active Resolution Refresh Rate Pixel Rate Aspect Ratio 480 60 Hz 25.175 MHz 4:3 720 480 50 Hz 27 MHz 4:3 720 480 59.94 Hz 27 MHz 4:3 800 600 60 Hz 40 MHz 4:3 1024 768 60 Hz 65 MHz 4:3 1280 720 74.25 MHz 16:9 H Pixels V Lines 640 50 Hz 60 Hz 1280 768 60 Hz 79.5 MHz 5:3 1360 768 60 Hz 85.5 MHz 16:9 1920 1080 60 Hz 148.5 MHz 16:9 1920 1080 148.
PAGE 26
Pin Assignments Digital RGB Output (DVI-D): DVI PIN ASSIGNMENT OF DVI CONNECTOR 01 TX2- 09 TX1- 17 TX0- 02 TX2+ 10 TX1+ 18 TX0+ 03 Shield (TX2 / TX4) 11 Shield (TX1 / TX3) 19 Shield (TX0 / TX5) 04 NC 12 NC 20 NC 05 NC 13 NC 21 NC 06 DDC-Serial Clock 14 +5V power 22 Shield (TXC) 07 DDC-Serial Data 15 Ground 23 TXC+ 08 NC 16 Hot plug detect 24 TXC- Digital RGB Input (DVI-D): DVI PIN ASSIGNMENT OF DVI CONNECTOR 01 RX2- 09 RX1- 17 RX0- 02 RX2+ 10 RX1+ 18
PAGE 27
RS-232 Output PIN No. NAME 01 connected to 7&8 02 RXD 03 TXD 04 connected to 6 05 GND 06 connected to 4 07 connected to 1&8 08 connected to 1&7 09 NC RS-232 Input PIN No.
PAGE 28
Troubleshooting ISSUE RECOMMENDED SOLUTION • Check whether the DVI in cable is completely plugged in. • Check whether the main switch is in the ON position, and the power cord is completely plugged in. No image is displayed. • Check whether the image source’s resolution is set to 1920 × 1080 (1080p). • Check whether the DVI cable is damaged or bent excessively. • Unplug the power cord from the socket and plug it back in after a few seconds to reset the display.
PAGE 29
Recycling and Energy Information DynaScan is firmly committed to its environmental protection efforts and we believe that reducing our products’ impact on the environment is of the utmost importance. We are dedicated to meet the latest environmental protection regulations. Energy usage Mode Energy consumption Normal Max. 310 W Standby <1W Disposal Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
PAGE 30
Material Contents Declaration Hazardous Substances Part Name Hexavalent Polybrominated Polybromodiphenyl Chromium Biphenyls Ethers PBB PBDE O O O O O O O O O O O O O O O O O Lead Mercury Cadmium Pb Hg Cd Cr PCBA O O O CHASSIS O O ACCESSORY O PACKAGE O 6+ “O” indicates that the level of the specified chemical substance is less than the threshold level specified in the standards of SJ/T-11363-2006 and EU 2005/618/EC.
PAGE 31
Limited Warranty WARRANTY COVERAGE DynaScan's warranty obligations are limited to the terms set forth below: DynaScan warrants its product against defects in materials and workmanship for a period of TWO (2) YEARS from the date of initial installation. exists, DynaScan will repair the product at no charge. If a defect A replacement part assumes the remaining warranty of the original product or NINETY (90) DAYS from the date of replacement or repair, whichever provides longer coverage for you.
PAGE 32
PROGRAM OR DATA STORED IN OR USED WITH DYNASCAN PRODUCTS, AND ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE PRODUCT. DYNASCAN SPECIFICALLY DOES NOT REPRESENT THAT IT WILL BE ABLE TO REPAIR ANY PRODUCT UNDER THIS WARRANTY OR MAKE A PRODUCT EXCHANGE WITHOUT RISK TO OR LOSS OF PROGRAMS OR DATA.