Professional LCDs User Manual Version 4.00 The use of diagrams and illustrations in the manual for reference only, actual product may be different.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series ii
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series Safety Instructions Warnings and Precautions Read and follow these instructions when connecting and using your Public Information Display: KNOW THESE SAFETY SYMBOLS • Unplug the display if you are not going to use it for an extensive period of time. • Unplug the display if you need to clean it with a slightly damp cloth. The screen many be wiped with a dry cloth when the power is off. However, never use alcohol, solvents or ammonia-based liquids.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series Regulatory Information CE Declaration of Conformity Polish Center for Testing and Certification Notice We declare under our responsibility that the product is in conformity with the following standards: • EN60950-1:2006+A11:2009 (Safety requirement of Information Technology Equipment) • EN55022:2006+A1:2007 (Radio Disturbance requirement of Information Technology Equipment) • EN55024:1998+A1:2001+A2:2003 (Immunity requirement of Information Technology Eq
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series Information for U.K. only WARNING - THIS APPLIANCE MUST BE EARTHED. How to connect a plug: Important: The wires in the mains lead are coloured in accordance with the following code: BLUE - “NEUTRAL” (“N”) This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: BROWN - “LIVE” (“L”) GREEN & YELLOW - “EARTH” (“E”) (B) (A) 1. Remove fuse cover and fuse. 1.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series China RoHS 中国电子信息产品污染控制标识要求 (中国RoHS法规标示要求) 产品中有毒有害物质或元素 的名称及含量 有毒有害物质或元素 部件名称 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr 6+) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 外壳 O O O O O O 液晶面板 X X O O O O 电路板组件 X O O O O O 附件 (遥控器，电源线，连接线) X O O O O O 遥控器电池 X O O O O O O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下. X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要 求.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series North Europe (Nordic Countries) Information Waste Electrical and Electronie EquipmentWEEE Placering/Ventilation Attention users in European Union private households VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series Table Of Contents 1. Unpacking and Installation.............................................................................................................1 1.1. Unpacking.................................................................................................................................1 1.2. Package Contents.....................................................................................................................1 1.3.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series 4.2.5. 4.2.6. 4.2.7. 4.2.8. CONFIGURATION1 menu............................................................................................18 CONFIGURATION2 menu............................................................................................19 CONFIGURATION3 menu............................................................................................20 ADVANCED OPTION menu..........................................................................
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series 1. Unpacking and Installation 1.1. • Unpacking This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • Due to the size and weight of this display it is recommended for two people to move it. • After opening the carton, ensure that the content is in good condition and complete. 1.2.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series 1.4. Installing and Removing Table Stands (optional) To install table stands: 1. Power off the display. 2. Spread a protective sheet on a flat surface. 3. Grab the carrying handles and place the display face-down on the protective sheet. 4. After inserting the stand in the guide block, tighten the screws on both sides of the display. NOTE: The long-end side of the stand should face to the front while installing.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series To remove table stands: 1. Power off the display. 2. Spread a protective sheet on a flat surface. 3. Grab the carrying handles and place the display face-down on the protective sheet. 4. Remove screws using a screwdriver and place them in a safe place for reuse. 1.5. Mounting on a Wall To mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available).
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series 1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the screen face. 2. Ensure you have all accessories for mounting this display (wall mount, ceiling mount, table stand, etc). 3. Follow the instructions that come with the base mounting kit. Failure to follow correct mounting procedures could result in damage to the equipment or injury to the user or installer.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series 2. Parts and Functions 2.1. Control Panel 9 MUTE INPUT MUTE INPUT 1 2 3 MENU MENU 4 5 6 7 1 8 2 3 4 5 6 7 8 DS46LX2 DS32CR \DS42CR \DS46CR series 9 MENU 1 2 3 4 5 6 7 8 DS55LX2 1 POWER button 8 Use this button to turn the display on or put the display to standby. 2 Return to previous menu while OSD menu is on, or to activate the OSD menu when OSD menu is off.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series 2.2. Input/Output Terminals DS42CR1 /DS46CR1 DS32CR1 15 15 DS46LX2 DS55LX2 15 15 DS32CR1 (OUT) (OUT) Pr Pb Y 1 3 2 (IN) 1 2 (IN) 3 4 5 6 7 8 9 10 11 12 10 13 14 DS42CR1 /DS46CR1 /DS46LX2 /DS55LX2 (OUT) (OUT) Pr Pb Y 1 3 2 (IN) 2 1 2 3 4 1 3 (IN) 4 5 6 7 MAIN POWER SWITCH 8 10 14 AUDIO IN 1, 2, 3 AUDIO IN 1: 3.5mm stereo phone jack Connect the supplied power cord to the wall outlet.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series 2.3. Remote Control 5 2.3.1. General functions 6 POWER 1 10 SMART VIDEO SOURCE AUDIO SOURCE 2 7 11 12 8 13 BRIGHTNESS 5 DISPLAY 6 9 14 15 10 Press to move the sub-picture left in PIP mode. [SET] button [AUTO ADJUST] button 7 8 17 EXIT VOL UP MUTE [MUTE] button [VIDEO SOURCE] button Press to toggle Video Source Menu. Press [ ] or [ ] button to select one of the video sources among HDMI, DVI-D, VGA, DVD / HD, VIDEO-S, or VIDEO .
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series 2.3.2. Inserting the batteries in the remote control 2.3.4. Operating range of the remote control Point the top of the remote control toward the display’s remote control sensor when pressing a button. The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 2. Align the batteries according to the (+) and (–) indications inside the battery compartment. 3. Replace the cover.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series 3. Connecting External Equipment 3.1. Using the Switch Cover A cover for the power switch is provided to prevent the display from being turned on or off accidentally. To lock the cover into position: 1. Align and insert the cover to the indentation located beside the main switch. 2. Use the screw to lock the cover.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series 3.2. Connecting External Equipment (DVD/VCR/VCD) 3.2.1. Using COMPONENT video input COMPONENT (YPbPr) Audio Output DVD / VCR / VCD To [AUDIO IN 2, 3] COMPONENT (YPbPr) 3.2.2.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series 3.3. Connecting a PC 3.3.1. Using VGA input From analog VGA output Mini D-Sub 15 pin From audio output PC or IBM compatible To [AUDIO IN 1, 2, 3] To [VGA IN] 3.3.2.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series 3.3.3.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series 3.4. External Audio Connection 3.4.1. Connecting external speakers External speaker 3.4.2.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series 3.5. Connecting Multiple Displays in a Daisy-chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a video wall. NOTE: Maximum 25 displays (5x5) can be used in a daisy-chain configuration. 3.5.1. Video connection Connect one of the following: • Connect the [RS232C OUT] connector of display 1 to the [RS232C IN] connector of display 2.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series 4. OSD Menu 4.2. An overall view of the On-Screen Display (OSD) structure is shown below. You can use it as a reference for further adjusting your display. 4.1. OSD Menu Overview 4.2.1. PICTURE menu PICTURE Navigating the OSD Menu 4.1.1.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series GAMMA SELECTION H POSITION Gamma is what controls the overall brightness of an image. Images which are not corrected properly can appear too white or too dark, so controlling the gamma properly can have a huge influence on the overall picture quality of your display. Press the [ ] button to move the image to the right, or [ ] to move the image to the left. V POSITION Press the [ ] button to move the image up, or [ ] to move the image down.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series AUDIO RESET H ZOOM Reset all settings in the AUDIO menu to factory preset values. Expands the horizontal size of the image only. 4.2.4. PIP menu V ZOOM Expands the vertical size of the image only. PIP PIP MODE PIP SIZE PIP AUDIO PIP H POSITION PIP V POSITION SUB INPUT PIP RESET H POSITION Moves the horizontal position of the image left or right. PIP V POSITION OFF SMALL MAIN AUDIO 100 0 VIDEO 1 Moves the vertical position of the image up or down.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series (O: PIP function available, X: PIP function unavailable) SCHEDULE By pressing the [PIP ON/OFF] button on the remote control, you can change the mode in the order shown below: POP PIP SBS ASPECT SBS FULL TODAY OFF 1 2 3 4 5 6 7 The resolutions in the PIP and POP modes are configured as follows: PIP SIZE {SMALL} : 320 x 240 pixels {MIDDLE} : 480 x 320 pixels EVERY DAY WED SAT EXIT 20 : 19 : 55 INPUT ＿ MON THU SUN :RETURN TUE FRI EVERY WEEK MENU :EXIT
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series DATE AND TIME OSD V POSITION Adjust the current date and time for the display’s internal clock. Adjust the vertical position of the OSD menu. INFORMATION OSD DATE AND TIME YEAR MONTH DAY HOUR MINUTE DAYLIGHT SAVING TIME CURRENT DATE TIME 2011 . 08 . 04 :SEL +-:ADJ EXIT :RETURN Set the period of time the information OSD displayed on the upper right corner of the screen. The information OSD will display when input signal is changed.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series Example: 5 x 5 screen matrix (25 displays) H MONITORS = 5 displays V MONITORS = 5 displays not compliant with it, images may not be displayed correctly. CONFIGURATION2 RESET V MONITORS H MONITORS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Reset all settings in the CONFIGURATION2 menu to factory preset values. Position • H MONITORS - Select the number of displays on the horizontal side.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series COOLING FAN BRIGHTNESS MOTION :SEL +-:ADJ {DVI MODE}: Used for DVI-D signal. • Select {DVI-PC} when the source device is a PC. • SCREEN SAVER AUTO OFF OFF EXIT :RETURN MENU :EXIT • {HDMI SIGNAL}: Used for HDMI signal. • Select {LIMITED} when displaying the signal that uses 16 to 235 levels of 256 levels for each R, G, and B. • • MENU {COOLING FAN} - Select {ON} to turn on the cooling fan all the time.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series LAN SETTING DHCP CLIENT IP ADDRESS SUBNET MASK DEFAULT GATEWAY 1 OFF PIP 2 3 :SEL • +-:ADJ EXIT :RETURN MENU :EXIT MENU DHCP - Choose to enable or disable the DHCP function. If enabled, the display will be assigned IP address, Subnet mask and Default gateway automatically. If disabled, you will be prompted to enter the following value manually. Finally, press [SET] button to store and save the chosen values.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series 5. Input Mode VGA Resolution: Standard Resolution VGA WVGA SVGA XGA WXGA WXGA SXGA SXGA WXGA WXGA UXGA HD1080 Active Resolution H Pixels V Lines 480 480 640 480 720 400 600 800 600 768 1024 768 1280 768 1280 800 1280 960 1280 1024 1360 768 1366 768 1600 1200 1920 1080 Refresh Rate Pixel Rate Aspect Ratio Stand for Mode 60 Hz 72 Hz 75 Hz 70 Hz 60 Hz 75 Hz 60 Hz 75 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 25.175 MHz 31.5 MHz 31.5 MHz 33.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series 6. Cleaning and Troubleshooting 6.1. Cleaning Caution When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too close.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series 6.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of the display is not switched on. 2. Make sure the power switch is switched on. 3. The selected input has no connection. 3. Connect a signal connection to the display. 4. The display is in standby mode.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series 7. Technical Specifications DS32CR1 Display: Item Specifications Screen Size (Active Area) 32” LCD Aspect ratio 16:9 Number of pixels 1366 (H) x 768 (V) Pixel pitch 0.36375 (H) x 0.36375 (V) [mm] Displayable colors 16.7M colors Brightness (typical) 500 cd/m2 Contrast ratio (typical) 1450:1 Viewing angle 178 degrees Panel life Min.50,000 Hours Typ.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series Weight (With Stand) 14 Kg Weight (Without Stand) 12.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series DS42CR1 Display: Item Specifications Screen Size (Active Area) 42” LCD Aspect ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.36375 (H) x 0.36375 (V) [mm] Displayable colors 16.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series Environmental Condition: Item Temperature Humidity Altitude Specifications Operational 0 ~ 40°C Storage -20 ~ 60°C Operational 20 ~ 80% RH (No condensation) Storage 5 ~ 95% RH (No condensation) Operational 0 ~ 3,000 m Internal Speaker: Item Specifications Type 1 Way 1 Speaker Input 10 W (RMS) Impedance 8Ω Output Sound Pressure 82 dB/W/M Frequency Response 160 Hz ~ 13 KHz 29
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series DS46CR1 Display: Item Specifications Screen Size (Active Area) 46” LCD Aspect ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.36375 (H) x 0.36375 (V) [mm] Displayable colors 16.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series Environmental Condition: Item Temperature Humidity Altitude Specifications Operational 0 ~ 40°C Storage -20 ~ 60°C Operational 20 ~ 80% RH (No condensation) Storage 5 ~ 95% RH (No condensation) Operational 0 ~ 3,000 m Internal Speaker: Item Specifications Type 1 Way 1 Speaker Input 10 W (RMS) Impedance 8Ω Output Sound Pressure 82 dB/W/M Frequency Response 160 Hz ~ 13 KHz 31
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series DS46LX2 Display: Item Specifications Screen Size (Active Area) 46” LCD Aspect ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.176 (H) x 0.176 (V) [mm] Displayable colors 16.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series Environmental Condition: Item Temperature Humidity Altitude Specifications Operational 0 ~ 40°C Storage -20 ~ 60°C Operational 20 ~ 80% RH (No condensation) Storage 5 ~ 95% RH (No condensation) Operational 0 ~ 3,000 m Internal Speaker: Item Specifications Type 1 Way 1 Speaker Input 10 W (RMS) Impedance 8Ω Output Sound Pressure 82 dB/W/M Frequency Response 160 Hz ~ 13 KHz 33
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series DS55LX2 Display: Item Specifications Screen Size (Active Area) 55” LCD Aspect ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.63 (H) x 0.63 (V) [mm] Displayable colors 16.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series Environmental Condition: Item Temperature Humidity Altitude Specifications Operational 0 ~ 40°C Storage -20 ~ 60°C Operational 20 ~ 80% RH (No condensation) Storage 5 ~ 95% RH (No condensation) Operational 0 ~ 3,000 m Internal Speaker: Item Specifications Type 1 Way 1 Speaker Input 10 W (RMS) Impedance 8Ω Output Sound Pressure 82 dB/W/M Frequency Response 160 Hz ~ 13 KHz 35
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series 2012 © All rights reserved. Specifications are subject to change without notice.
DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series 37
