User's Manual

65701 User Manual 19
display will automatically switch the
brightness according to the time set.
High Level 100
Adjusts the highest brightness level.
Range 0 – 100.
Low Level 20
Adjusts the lowest brightness level.
Range 0 – 100.
High Level Time 08:00 Set high level time.
Low Level Time 18:00 Set low level time.
Local Dimming Medium
Adjusts the contrast. High is the highest
contrast. Off is the lowest contrast.
(Off, Low, Medium and High)
5. Advance
ITEM 1 ITEM 2 DEFAULT DESCRIPTION
Display Mode Landscape
Change the Menu orientation. The Menu
can be displayed in either LANDSCAPE or
PORTRAIT mode.
Screen
Protection
Off
Turn on / off image burn-in protection.
Set image burn-in protection interval.
Range 0 – 100 minutes.
IR Control On
Enable/disable the remote control for Menu.
Note: When disabled, the remote control
function can be enabled again from
the control panel on the display or
through the DynaScan “Display
Manager” application.
Volume 100
Set volume.
Range 100 – 0.
Reset to Default
Setting
Off
Restore all settings to default.
Note: It does not modify CURRENT TIME,
POWER ON TIME and POWER OFF
TIME.
AC Back Status Power On
Choose to use the AC back status function.
Power On: Display booting up when the
power back after an outage.
Standby: Display keeps soft-off status when
the power back after an outage.
Memory: Display will back to the last state
when the power back after an
outage.
Advance
USBUpdate
Select to upgrade the firmware version; the
corresponding I/O position for USB port,
please refer to p.12 - H.