Product Manual

Oximeter SerieSOximeter SerieS
PULSE OXIMETER INSTRUCTION MANUAL
31
E 9: The SpO2 value is lower than the low limit.
E 10: The SpO
2 value is higher than the high limit.
E 11: The value of pulse rate is lower
than the low limit.
E 12: The value of pulse rate is higher
than the high limit.
E 13: Power supply is insucient.
When E9, E10, E11 or E12 occurs, the value of
parameter will ash.
• Check the error code.
• Press the right key under normal screen, it will indicate
an error code. To return to normal screen please press
menu button again.
WARNING!
When alarm occurs, DO as follows:
• Check which type of alarm is on.
• Check patient’s condition if parameter alarm is on.
• Make the alarm mute if necessary.
• Check whether the alarm is in proper condition in case
of no warning.
8 Beep on/o
Press the menu key ve times under the normal screen to
enter access to this function, the associated screen will be
displayed. Press up or down key to set the pulse beep on/o.